Product Search
Search results for 'T85'
Showing 81 - 100 of 1124 Total Results
CA-3032
Location: Flow Tables
Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.
SA-0650
Location: Mortar & Pestle
Soil mortar, when used with the pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior. Rubber-tipped pestle is 8" long and is for grinding soils without breaking individual particles.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
CA-2165
Location: Clean-N-Weigh
The Clean-N-Weigh accessory offers the fastest and most efficient method of processing large, coarse aggregate samples for particle size tests.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
SA-0362
Location: Plastic Limit
Test Mark's Plastic Limit Roller for soils is a unique time-saving device designed to produce consistent results by an easily repeatable mechanical technique.
CA-0600-04P
Location: Parts & Accessories
Meter top housing. Plastic Roll-A-Meter Kit replacement parts.
SA-0651
Location: Mortar & Pestle
Soil Mortar, when used with the rubber tipped pestle, is for pulverizing dry samples of soil and other materials. Mortar is made from heavy porcelain with glazed exterior.
CA-0285
Location: Cube Molds
The Econ-O-Cube mold from Test Mark forms three 2-inch cubes at one time in a diagonal arrangement. Easy and secure online ordering.
SA-0113
Location: Sample Ejector
The Soil Sample Ejector from Test Mark is used for removing soil samples from molds up to 7 in. long and 2, 3 and 4 in. dia. Shelby Tubes.
CA-0933
Location: Specimen Curing
The curing tank immersion heater from Test Mark has an adjustable thermostat and a 1,000 watt 15 amp incolloy shielded heating element that resists rust.
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
Exhaust Chamber for Bench Oven
CA-1425-04
Location: Ovens & Hot Plates
Exhaust chamber adapter is available for processing material where undesirable fumes are present. Encloses the oven exhaust and allows venting into a standard 3" (76 mm) stove pipe.
CA-0915
Location: Specimen Curing
Portable curing chest is lightweight and easily folded for storage. Made with advanced polymers and vinyl with 1/2" cooler foam, chest holds up to eight (9) 6" x 12" concrete test cylinders.
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
6" x 12" Cylinder Lifting Handle
CA-0216
Location: Cylinder Transport
The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 6" by 12" model.
4" x 8" Cylinder Lifting Handle
CA-0213
Location: Cylinder Transport
The concrete cylinder lifting handle from Test Mark can be used to remove cylinders from curing tanks safely. 4" by 8" model.
Cover Plate for Bronze Cube Mold
CA-0280-C
Location: Cement
Bronze cover plate with filling holes used with bronze cube mold for capping compound compressive strength testing.
ES Series Low Profile Bench Scale
Location: Low Profile Bench Scale
SC-0360 Series Bench Scale from Test Mark features easy two button operation, stability indicator, auto-zero tracking, AC adapter (included).
