Product Search
Search results for 'C-174'
Showing 101 - 120 of 1647 Total Results
3" dia. x 10" long Shelby Tube
SA-1380
Location: Parts & Accessories
3" dia. thin walled sampling tubes are galvanized steel. A chamfered end forms a cutting edge, includes holes for securing tubes to a drive head. Plastic caps hold sample in tube during transportation and storage. Drive Head is for use with drive hammers with "E" rod connection.
CA-0100
Location: Parts & Accessories
Test Mark's Ultra-Strength Capping Compound is used to cap the ends of concrete test cylinders so compression force will be evenly distributed to the cylinder during testing.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
Speedy Moisture Reagent, 10 lb. can
SA-0262
Location: Soils
Calcium Carbide Reagent is used with the Speedy Moisture Tester to create pressure proportional to moisture in test samples. Supplied in 10-lb. can.
TM-720
Location: Digital Load Indicating Systems
Simultaneously displays both live load and rate of load, Designed for the harshest laboratory environments with a moisture/dust proof case, Accuracy of ± .5% of indicated load, Made in the USA. Display depicted after test is complete Spreadsheet The i720 is an easy to use digital load indicator...
SA-3500
Location: Mud Balance Testing
Mud Balances are used as standard procedure instruments for testing water and oil-base drilling fluids and oil well cements.
AA-0010
Location: Marshall Basic Compression Testing
The lower segment of Test Mark's Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments.
AA-0011
Location: Marshall Basic Compression Testing
The lower segment of the Marshall breaking head is mounted on a base with two vertical guide rods to connect the upper and lower segments - from Test Mark.
(3) options
Location: Beam Testers
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6 x 6 in. cross-section beams - from Test Mark.
Prism Mold 4"x 4"x 10" - 1 gang
CA-2964
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change tests.
Modified Vicat for Masonry Mortars
CA-3120
Location: Vicat Apparatus
The Modified Vicat Apparatus determines the consistency and consistency retention of mortar used with brick and block applications.
Liquid Limit (w/counter) Test Set
SA-0310-S
Location: Liquid Limit Test Sets
Liquid limit test sets with counters are available as part of complete line of soil testing products from Test Mark Industries.
(2) options
Location: Canvas Wraps
Neoprene pad inserts from Test Mark are made from a tough elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results.
6" ( 152 mm) Cube Mold, Single
CA-0275
Location: Parts & Accessories
The single cavity cube mold from Test Mark is used for compression testing of concrete cubes or mortar samples.
(3) options
Location: Aggregate Washers
Aggregate samples are automatically washed with Test Mark's aggregate washers to remove clay and other fines passing a No. 200 sieve.
4" Test Cylinder Carrying Case
CA-0214
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 4x8 test cyliners for easier field to lab transfer with less specimen damage.
CA-2800
Location: Penetrometer
The Acme Penetrometer from Test Mark determines the time of setting of concrete and the effects of variables such as temperature, cement, mixture proportions, additions, and ad mixtures upon the time of setting and hardening of concrete.
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
