Product Search
Search results for 'T127'
Showing 121 - 140 of 1648 Total Results
Prism Mold 4"x 4"x 10" - 1 gang
CA-2964
Location: Parts & Accessories
These molds are designed to produce the required 10" gauge length prism molds. Molds feature removable partition, base and end plates. Molds produce cement prism specimens 11 1/4" long. Including studs, outside to outside length of specimen is 11 5/8". Application: volume change tests.
CA-2181
Location: Parts & Accessories
Unit supplied with a permanent water connect with regulator valve, tubing, saddle valve, stainless-steel goose-neck water tube with swivel connection, and a 6' power cord with GFCI (ground fault circuit interrupter) for operator safety.
AA-0120
Location: Drierite
Easily installs in-line between vacuum pump and rice test equipment. Refillable unit measures 2 5/8" by 11 3/8" with hose barbs at both ends which will accept ¼" to 3/8' flexible tubing. One of our Drierite products.
Voluvessel, 1/20 cu ft capacity
SA-1400
Location: Voluvessel
The Voluvessel from Test Mark is a direct reading instrument that is easily used and requires no calibration. A liquid filled balloon measures hole volume after removal of soil sample.
CA-0500
Location: Air Entrainment/Pressure Meter
The air entrainment concrete pressure meter from Test Mark is part of a complete line of concrete testing equipment, available for easy online ordering.
Constant Head Permeameter Cell, 2.5" (63.4 mm)
SA-1110
Location: Parts & Accessories
Cells are used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils. Two manometer ports are grooved & screened on the inside. 100 mesh screens are used to prevent migration of material through valves & tubing during test. Top cap...
CA-0460
Location: Parts & Accessories
Strike-off Trowels are used to strike off and smooth excess concrete and grout from the surface of molds. Used for mixing cement, concrete and soil samples.
CA-0470
Location: Rubber Mallet
The rubber mallet from Test Mark is used to consolidate materials and release entrapped air in concrete molds, air meters, slump cones and unit weight buckets.
(4) options
Location: Cylinder Molds - Steel
Test Mark Industries features steel concrete cylinder molds as part of a complete line of concrete testing equipment.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
3¼" Standard Hand Auger Assembly
SA-1201
Location: Parts & Accessories
Hand augers with quick connectors feature heavy gauge, heat treated carbon steel bucket with cupped blades to facilitate hole advancement. Auger head, extensions and T-handle are zinc electroplated for rust resistance.
CA-2585
Location: Rebar Electronic Metal Detector
Test Mark's hand-held electronic metal detector locates rebars, metal pipe and conduit through concrete up to depths of 6 inches.
CA-2550
Location: Sample Splitters
The heavy-duty sample splitter from Test Mark accurately divides aggregates up to 2 inches in diameter for further testing.
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
CA-6010
Location: Specimen Curing
Aquafog from Test Mark provides clouds of fog that will humidify concrete curing rooms...available as part of a complete line of concrete testing equipment.
CA-0860
Location: Fire Proofing
Test Mark Industries provides this fire proofing depth gauge for measuring the thickness of sprayed fireproofing.
CA-0289
Location: Grout Sample Box
The grout sample box from Test Mark features engineered-slotted corrugation which retains moisture while simulating CMU absorption rate.
