Product Search
Search results for 'D5581'
Showing 141 - 160 of 1648 Total Results
SA-2015-L
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 1.416" (36mm) high, 5-15/16" (150.8mm) dia.
S.S. Pan 20 3/4" x 12 3/4" x 4"
CA-2600
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
Straight-Edge 1/8" x 1 1/4" x 8" long (3 x 32 x 200 mm)
SA-0114
Location: Flow Tables
Straightedges are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
Pad Caps and Retainer Rings - Steel
(16) options
Location: Unbonded Capping (Retainers and Pad Caps)
Pad caps and retainer rings are available from Test Mark as part of a complete line of concrete testing equipment and supplies.
CA-6010
Location: Specimen Curing
Aquafog from Test Mark provides clouds of fog that will humidify concrete curing rooms...available as part of a complete line of concrete testing equipment.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
Test Mark Industries is a manufacturer and supplier of construction materials testing equipment used for testing concrete, cement, aggregates, asphalt and soil samples to ASTM and AASHTO standards.
(3) options
Location: Straight-Edges
Straightedges from Test Mark are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
Vapor Emission Test Kit, 3 per pkg.
CA-2594
Location: Parts & Accessories
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations. Product has three per package.
(2) options
Location: Permeameters
The Compaction Permeameter from Test Mark is used for determining permeability of clay, sand and gravel soils using the Proctor plasticity compaction method.
Compaction Permeameter, 4"W x 4"D x 12"H (102 x 102 x 305 mm)
SA-1180
Location: Parts & Accessories
For determining permeability of clay, sand, and gravel soils, this unit uses the Proctor plasticity compaction method. Two-piece cylindrical mold includes upper plate with valve, water inlet/outlet, filter base plate and filter stones.
(2) options
Location: Consistometer
The Vebe Consistometer determines the consistency and density of low slump roller-compacted concrete - from Test Mark Industries.
(2) options
Location: Rebar Locator
Test Mark's Rebarscope™ locates reinforcement bars in concrete and determines their depth and size.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
Muffle Furnace 4 1/4" x 5" x 6"
CA-1480
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side to provide uniform temperature.
CA-1485
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side provide uniform temperature.
(4) options
Location: Manual Compression Testing Machines
Machine custom-configured to test cubes, Accuracy of ±.5% of indicated load from 1,000 – 100,000 lbs. (11 – 1,112 kN), Choice of 3 digital load-indicating systems, Quiet-running, continuous-duty hydraulic pump. Request a Quote The CM-0100 series is based on our CM-2500 machine, custom-configured...
Dynamic Cone Penetrometer only
SA-1225
Location: Dynamic Cone Penetrometer
The Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20" and can be used effectively in augured holes to depths of 15 to 20 feet. The DCP features a heat treated cone and zinc plated components.
Prism Mold 1"x 1"x 10" - 1 gang
CA-2954
Location: Parts & Accessories
Gang Molds from Test Mark are designed to produce the required 10 inch gauge length prism molds. Easy and secure ordering online.
