WOC 2024

Product Search

Search results for 'D6926'

Showing 161 - 180 of 1124 Total Results

Spacers for CM-4000 and CM-5000 Series

(2) options

Location: Spacers

Spacer Assembly for Compresson Machines is used to adjust the inside vertical testing height of the compression machine load frame for testing samples of various heights.

Density Drive Sampler, 3" ( 76.2 mm)

SA-1355

Location: Density Drive Sampler

The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.

Sample Cart

CA-0212

Location: Cylinder Transport

Sample cart is painted steel with two shelves. Overall dimensions 34" x 17" x 31 ½" (864 x 432 x 800 mm). Load capacity is 400 lbs. (181 kg). Ships unassembled.

CBR Test Press, Mechanical

SA-2000

Location: CBR Load Frames

The CBR (California Bearing Ratio) loading press from Test Mark uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample.

Cylinder Splitting Set

(3) options

Location: Test Platens

Used to determine the splitting tensile strength of concrete cylinders.. The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of test...

Static Cone Penetrometer

SA-1500

Location: Static Cone Penetrometer

Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.

Gillmore Apparatus

CA-3150

Location: Apparatus

The Gillmore Apparatus is used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime and certain mortars.

Splitter 4"

CA-2560

Location: Sample Splitters

The adjustable sample splitter from Test Mark reduces aggregates to a suitable size and amount for gradation testing.

Aquaprobe™ Soil Moisture Meter

(2) options

Location: Soil Moisture Meters

Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.

Dial Indicator 1.000" x .001"

SA-2020

Location: CBR Accessories

Dial indicator has 1.000" operating range, graduated in 0.001" divisions, clockwise movement and revolution counter. Recommended for use with tripod attachment.

Sand Cone Apparatus 6 1/2"

SA-0200

Location: Sand Density

The Sand Cone Density Apparatus from Test Mark Industries determines the in-place density of soils.

Mini Sample Splitter

CA-2500

Location: Sample Splitters

The Test Mark mini sample splitter accurately divides dry materials, such as cement, powdered ores, coal, coke, sand, soils and other fine aggregates, so each half is representative of the original total sample.

Graduated Cylinders, Glass

(7) options

Location: Graduated Cylinders

Test Mark features a graduated glass cylinders as part of a complete line of laboratory and soil test equipment.

30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)

30 Gallon Water Tank - 24" x 18" x 18" deep (620 x 457 x 457 mm). Max. Oper. Temp. - 140°F (60°C)

CA-2742

Location: Parts & Accessories

Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 30 Gallon (114L) tank is 24" x 18" x 18" deep (610 x 457 x 457 mm). Maximum operating temperature is 140°F (60° C).

44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)

44 Gallon Water Tank - 24" x 18" x 24" deep (610 x 457 x 610 mm). Max. Oper. Temp. - 140°F (60°C)

CA-2744

Location: Parts & Accessories

Seamless, translucent tanks are ¼" (6.4 mm) thick with a drain faucet and overflow outlet. 44 gallon tank is 24" x 18" x 24" deep (610 x 457 x 610 mm). Maximum operating temperature is 140°F (60° C).

Plastic Roll-A-Meter Kit

CA-0600-P

Location: Air Entrainment/Roll-A-Meter

The PVC and fiberglass reinforced Roll-A-Meter from Test Mark measures entrained air in any type of concrete, including lightweight mixes.

Cylinder Molds - Plastic

(8) options

Location: Cylinder Molds - Plastic

Test Mark Industries features plastic concrete cylinder molds as part of a complete line of concrete testing equipment.