Product Search
Search results for 'D6910'
Showing 201 - 220 of 1124 Total Results
CA-0351
Location: Brushes
Test Mark provides natural horsehair bench brushes for lab and field use in materials testing applications.
Location: Concrete
Experts recommend the RH test as the most reliable in-depth measuring method for concrete moisture available today. The Blue Peg System measures relative humidity, temperature and dew point using a single microchip, factory calibrated to NIST standards. Each Blue Peg comes with a NIST traceable...
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
CA-2732
Location: Specific Gravity Bench
Stainless steel hollow tube specific gravity cradle eliminates water displacement for improved accuracy in specific gravity test applications.
CA-2861
Location: Concrete
1/2" ID discharge tube orifice is used with grouts having 35 seconds or less efflux time.
CA-2585
Location: Rebar Electronic Metal Detector
Test Mark's hand-held electronic metal detector locates rebars, metal pipe and conduit through concrete up to depths of 6 inches.
Aqua-Check Kit, 20 gram capacity
SA-0255
Location: Moisture Testing
The Aqua-Check from Test Mark is a portable system used for measuring the moisture content of a wide range of materials including sand, aggregates and soil.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
(2) options
Location: Surface Thermometer
Surface thermometers from Test Mark put the sensing element into direct contact with the surface to measure the temperature.
CA-2745
Location: Specific Gravity Bench
200 watt heater/circulator is attached to a stainless steel bracket that hangs on the water tank to maintain constant temperature.
CA-1515-S
Location: Sifter, Laboratory
Designed to accept up to 10 - 8" dia. full height sieves or 6 12" dia. intermediate height sieves plus pan and cover. Sifter quietly rotates and taps sieve frame from below with plastic composite tamper.
SA-1000
Location: Preparation Tools
The preparation knife from Test Mark Industries is used for sample preparation and general lab work.
(4) options
Location: Moisture Boxes
Test Mark provides aluminum moisture boxes that protect the sample from exposure during weighing operations.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen.. The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
CA-4052
Location: Sand Equivalent
The mechanical motor-driven sand equivalent shaker from Test Mark is recommended for performing sand equivalent tests on a regular basis.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
SA-0360
Location: Soils
Glass plate with ground finish on one side and seamed edges. Dimensions: 12" x 12" x 3/8" thick.
CA-0850
Location: Concrete Penetrometer
The Concrete Pocket Penetrometer from Test Mark is lightweight for field and lab evaluation of the initial set of concrete mortar based on ASTM C-403.
