Product Search
Search results for 'D5856'
Showing 321 - 340 of 1124 Total Results
SC-0065
Location: Scales
This Stainless Steel Scoop is used to contain liquid or powder material being weighed on Triple Beam Balance. The stainless steel construction is ideal for weighing hot mix material with a convenient spout for quick, neat pouring of materials. Comes with a hanging counterweight to compensate for...
CA-4060-05
Location: Aggregate
Siphon assembly used for flow of working calcium chloride solution through the irrigator tube.
CA-4060-08
Location: Aggregate
3 oz. tin having a capacity of 85 +/- 5 ml, used to prepare working calcium chloride solution.
Drierite Dessicant, 1 lb. white
AA-0124
Location: Drierite
Protects vacuum pump by removing final trace of moisture. Must be used with blue indicating drierite.
AA-0012
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 4" model.
AA-0013
Location: Marshall Basic Compression Testing
Lottman breaking heads are used for testing tensile strength; 6" model.
AA-2020
Location: Reflux Extractor
Pressure Limit Device from Test Mark is used with Reflux extractors to protect copper condenser from excessive pressure.
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
CA-4008
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Case of 75.
CA-0710-01
Location: Concrete
Replacement wash bottle used to insert alcohol into Chase air indicator.
CA-2861
Location: Concrete
1/2" ID discharge tube orifice is used with grouts having 35 seconds or less efflux time.
CA-2862
Location: Concrete
Special 3/4" orifice is used with thick grouts with efflux time of more than 35 seconds.
Spacers for CM-0030 and CM-2500 series
(4) options
Location: Spacers
Spacers are used with test platens to adjust the vertical working clearance height inside a machines load frame, for testing samples of various types and sizes to prevent over-extension of the load frames piston. They are manufactured from steel and machined plane on both ends to maintain a...
(4) options
Location: Retainers & Pads
Test Mark supplies grout sample unbonded capping system for compression testing of grout specimens in concrete testing environments.
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
AA-0005
Location: Marshall Basic Compression Testing
The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.
Screen Shaker Manual Clamping **DISCONTINUED**
CA-2151
Location: Shakers
Test Mark supplies screen shaker manual clamping for the aggregate testing industry.
Drive Tubes, 3" x 2.75" (76.2 x 69.9 mm), 10/pkg
SA-1371
Location: Density Drive Sampler
For use with Drive Sampler, 3" (76.2mm) x 2.75" (69.9mm) length, (3" x 0.01 ft3). Accessory to the density drive sampler.
