Product Search
Search results for 'M-205'
Showing 61 - 80 of 1123 Total Results
CA-0500-42
Location: Air Meter Calibrators
Brass reusable calibration vessel can be used with any 1/4 cu. ft. concrete pressure meter. Vessel is exactly 5% air by volume when placed in the pressure meter base. Part of our air meter calibrator products.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
SC-1400 Series Industrial Balance
(3) options
Location: GP Series Industrial Swing Arm Balance
SC-1400 Series Industrial Balance features swing arm type display, internal calibration, below balance weighing with optional under-hook, auto power off, AC adapter.
CA-0500-43
Location: Air Meter Calibrators
Aluminum Air Meter Calibrator quickly checks the accuracy of any pressure-type concrete air meter with a .25 cu. ft. base - from Test Mark Industries.
(3) options
Location: Test Platens
Used to determine the splitting tensile strength of concrete cylinders. . The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of...
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
CA-0355-SP
Location: Self-Consolidating Concrete
Test Mark's J-Ring Test Set is used to characterize the ability of self-consolidating concrete (SCC) to pass through reinforcing steel.
Plastic Beam Mold 6" x 6" x 21"
CA-0340
Location: Plastic Beam Molds
Test Mark's durable, lightweight plastic beam mold uses simple thumbscrews for easy stripping, cleaning, and assembly.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
AA-2055
Location: Vacuum Extractor
Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
(2) options
Location: Trowels
Test Mark's strike-off trowels are used to strike off and smooth excess concrete and grout from the surface of molds.
CA-3100
Location: Vicat Apparatus
The Vicat Consistency Apparatus is part of a complete line of cement testing equipment from Test Mark Industries.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams. . Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks...
Capping Compound *TEMPORARILY OUT OF STOCK*
CA-0100
Location: Parts & Accessories
Test Mark's Ultra-Strength Capping Compound is used to cap the ends of concrete test cylinders so compression force will be evenly distributed to the cylinder during testing.
CA-0890
Location: Sling Psychrometer
The Sling Psychrometer from Test Mark determines relative humidity with a matched pair of organic filled 20-120° F x 1° thermometers to measure wet and dry bulb temperatures.
Construction Evaporation Meter
CA-5200
Location: Weather Tracker
Test Mark's Construction Weather Tracker displays evaporation rates for concrete testing applications.
Speedy Moisture Reagent, 10 lb. can
SA-0262
Location: Soils
Calcium Carbide Reagent is used with the Speedy Moisture Tester to create pressure proportional to moisture in test samples. Supplied in 10-lb. can.
CA-0280-L
Location: Cube Molds
Polypropylene water tight disposable liners used with cube maker system. Sold 200 per carton.
CA-1320
Location: Hot Plates
Test Mark's laboratory hot plate features a white ceramic surface that is acid and alkali resistant. Non-heating frame surrounds the heated plate for added protection. Easy to set analog temperature control knob with graduated scale and LED display.
