Product Search
Search results for 'C183'
Showing 801 - 820 of 1648 Total Results
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
Bench Scale, 110 lbs. x 0.05 lbs. (50 kg x 0.02 kg)
SC-0360
Location: Parts & Accessories
Laboratory bench scale standard features include easy two button operation, stability indicator, auto-zero tracking, AC adapter (included) or 6 - AA batteries (not included) with battery saving auto-off timer after five minutes and large platform with leveling feet. Pan size 16" x 20".
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
Marshall Compaction Rotating Mold, 4"
AA-0046
Location: Marshall 4" Compaction Molds
Marshall Compaction Rotating Mold is used for preparing test specimens with rotating mold compactors - from Test Mark Industries.
6.5" dia. x 1" Thick Lower Platen
MA-0600
Location: Parts & Accessories
6.5" dia. x 1" Thick Platen.
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
5.5 lb. Corp. of Engineers Hammer
SA-0125
Location: Parts & Accessories
Manual compaction hammers have a 5.5 lb. (2.54 kg) or 10 lb. (5.08 kg) weight with a drop of 12" (305 mm) and a 2" (50.8 mm) face. Hammer is guided on a shaft. The foot assembly has a recoil mechanism to reduce impact fatigue. Tamping face is removable and replaceable.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
CA-0600-P
Location: Air Entrainment/Roll-A-Meter
The PVC and fiberglass reinforced Roll-A-Meter from Test Mark measures entrained air in any type of concrete, including lightweight mixes.
CA-0851
Location: Cement
Penetrometer Foot is a stainless steel disk, 2.70" (68.58 mm) dia. for use with masonry mortars to determine board life and initial consistency.
(2) options
Location: Manometer
The Digital Manometer features a digital display with a range of 0 to 1000 mm Hg, and accuracy range is + 0.5% of full scale capacity - available from Test Mark.
(3) options
Location: Vapor Emissions Test Kit
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations.
CA-2740
Location: Specific Gravity Bench
The Specific Gravity Bench from Test Mark weights suspended samples in water to determine specific gravity of aggregates and other materials.
(3) options
Location: Spacers
Spacers are used to adjust the vertical testing height inside compression testing machine load frames when testing samples of various heights. Spacer mounts to the top cross head of the load frame. Spacer is manufactured from steel and is precision ground on both ends and painted for rust...
S.S. Pan 20 3/4" x 12 3/4" x 4"
CA-2600
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
S.S. Pan 9 1/2 x 11 7/8 x 2 1/2
CA-2605
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
S.S. Pan 6 3/8" x 10 3/8" x 2 1/2"
CA-2610
Location: Parts & Accessories
These rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials. Pans are made from easy-to-clean stainless steel. Top edges are extended for secure handling.
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weight set includes a Statement of Accuracy from the manufacturer or an NIST Traceable Certificate - Test Mark Industries.
Air Bleeder Valve Cap and Gasket
CA-0500-5G
Location: Parts & Accessories
Air Bleeder Valve Cap and Gasket. Pressure meter replacement parts; Test Mark Industries. Needs CA-0500-07 Air Bleeder Valve Gasket...
