Product Search
Search results for 'C-780'
Showing 81 - 100 of 1123 Total Results
SA-4010
Location: Dynamic Cone Penetrometer
The Dual Mass DCP Standard Kit from Test Mark measures the shear strength of soil with a CBR between 0.5 - 100%.
CA-0915
Location: Specimen Curing
Portable curing chest is lightweight and easily folded for storage. Made with advanced polymers and vinyl with 1/2" cooler foam, chest holds up to eight (9) 6" x 12" concrete test cylinders.
CA-1420
Location: Bench Ovens
These bench ovens are used for curing, drying, baking. Ovens feature high density insulation for reduced heat loss and efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 7.0 cu. ft., 437ºF model.
SA-3500
Location: Mud Balance Testing
Mud Balances are used as standard procedure instruments for testing water and oil-base drilling fluids and oil well cements.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
CA-0851
Location: Cement
Penetrometer Foot is a stainless steel disk, 2.70" (68.58 mm) dia. for use with masonry mortars to determine board life and initial consistency.
(2) options
Location: Canvas Wraps
Neoprene pad inserts from Test Mark are made from a tough elastomeric material that evens out and fills irregularities in the ends of concrete cylinders to assure even distribution of test loads for consistent results.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
Bench Oven, 10.6 cu. ft. 437ºF
CA-1440
Location: Bench Ovens
These bench ovens are used for curing, drying, and baking. Ovens feature high density insulation for reduced heat loss efficient operation, adjustable shelves on 1 1/2" centers, gasketed doors, and scratch resistant finish. 10.6 cu. ft. model.
CA-0205
Location: Pad Cap Quick Release Powder
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. Kit includes 8 oz. powder dispenser and 48 oz. of refill powder.
(8) options
Location: Cylinder Molds - Plastic
Test Mark Industries features plastic concrete cylinder molds as part of a complete line of concrete testing equipment.
CA-0205-01
Location: Concrete
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 48 oz. refill sold in packs of 2.
CA-0205-02
Location: Concrete
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. 8 oz. shaker dispenser sold in packs of 2.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
(3) options
Location: Beam Testers
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6 x 6 in. cross-section beams - from Test Mark.
AA-0120
Location: Drierite
Easily installs in-line between vacuum pump and rice test equipment. Refillable unit measures 2 5/8" by 11 3/8" with hose barbs at both ends which will accept ¼" to 3/8' flexible tubing. One of our Drierite products.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
