Product Search
Search results for 'C-803'
Showing 81 - 100 of 1123 Total Results
SA-1300
Location: Probe Rod
The Steel Probe Rod from Test Mark is used for locating soft zones in and under compacted areas in sub-grades and footing excavations.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen. . The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
CA-0245
Location: Vibrator
The lightweight electric concrete vibrator from Test Mark vibrates concrete test cylinders and molds in the laboratory or field.
CA-3010
Location: Flow Tables
Motorized flow tables from Test Mark Industries are used to determine consistency of cement mortars. Features a 10-inch dia. cast bronze table.
CA-0842
Location: Temperature/Humidity
Simultaneously displays both room and probe current temperature and humidity, with push button minimum/maximum memory recall function. Measuring range: Temperature 14 to 140 F (-10 to 60 C); Precision +/- 1.4 F (+/- .8 C) from 50 to 86 F (10 to 30 C), otherwise +/- 1.8 F (+/- 1 C). Humidity: 10 to...
CA-2160
Location: Door Enclosure
Lightweight, easily removable door panel designed to minimize dust and noise. Sturdy fiberboard door has a full-width hinge and sound deadening liner to cover the top and front openings.
(3) options
Location: Beam Testers
Self-contained shock-proof portable concrete beam tester accurately and easily determines flexural strengths of 6 x 6 in. cross-section beams - from Test Mark.
CA-0933
Location: Specimen Curing
The curing tank immersion heater from Test Mark has an adjustable thermostat and a 1,000 watt 15 amp incolloy shielded heating element that resists rust.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
Asphalt Dispenser, 4 Qt. (3.8 L)
AA-3000
Location: Asphalt Dispenser
Asphalt Dispenser features a round melting pot has stainless steel crucible & shell to facilitate easy clean up - from Test Mark Industries.
CA-2800
Location: Penetrometer
The Acme Penetrometer from Test Mark determines the time of setting of concrete and the effects of variables such as temperature, cement, mixture proportions, additions, and ad mixtures upon the time of setting and hardening of concrete.
CA-0280
Location: Cube Molds
The 2-inch (51 mm) diagonal arrangement three-gang bronze cube mold from Test Mark makes three test cubes at a time.
Marshall Automatic Double Compactor, 4" Rotating Mold
AA-0022
Location: Marshall Automatic Compactor
Automatically compacts two samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
(2) options
Location: Curing Boxes
Portable Curing Boxes for concrete testing store up to 22 standard 6x12 test cylinders from Test Mark Industries.
(3) options
Location: Platform Scales
Digital Platform Scales from Test Mark feature high resolution, two selectable weighing units of lb or kg, a 12-inch x 15-inch stainless steel platform and leveling feet with bubble indicator.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
