Product Search
Search results for 'D5581'
Showing 121 - 140 of 1648 Total Results
CA-3000
Location: Flow Tables
Hand driven flow tables are used to determine consistency of cement mortars. A test specimen is molded on the table to a specified volume and shape.
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
Straight-Edge 1/8" x 1 1/4" x 12" long (3 x 32 x 305 mm)
SA-0115
Location: Soils
Straightedge is for striking-off samples in molds or containers. Made of ground steel with beveled edges.
SA-2020
Location: CBR Accessories
Dial indicator has 1.000" operating range, graduated in 0.001" divisions, clockwise movement and revolution counter. Recommended for use with tripod attachment.
SA-0280
Location: Parts & Accessories
The Aquaprobe™ can determine the soil moisture content of different types of soils and other fine aggregate. Simply insert the five prongs in the soil to be measured and review the percentage moisture on display. A special guide is supplied to assist the user with inserting the prongs in...
Curing Rack, 4" x 8" Cylinders 6/ctn
CA-0218
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
Curing Rack, 4" x 8" Cylinders 12/ctn
CA-0219
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
CA-2500
Location: Sample Splitters
The Test Mark mini sample splitter accurately divides dry materials, such as cement, powdered ores, coal, coke, sand, soils and other fine aggregates, so each half is representative of the original total sample.
AA-0050
Location: Asphalt
Circular, smooth-edged 4" diameter disc fits in bottom of 4" compaction molds prior to compaction test. Facilitates removal of sample specimen from mold.
6" x 12" (152 x 305 mm) Plastic Mold with Lip, 20/ctn
CA-0206
Location: Parts & Accessories
Plastic molds from Test Mark are injected plastic for close tolerances and consistency of shape. Easy online ordering.
Location: Soils
Test Mark's COE Manual Compaction Hammer features a recoil mechanism in the foot assembly to reduce impact fatigue.
CA-1405
Location: Lab Ovens
These gravity convection ovens are used for drying, baking, sterilizing, evaporating, heat-treating, and testing. 1.27 cu. ft. model.
CA-2181
Location: Parts & Accessories
Unit supplied with a permanent water connect with regulator valve, tubing, saddle valve, stainless-steel goose-neck water tube with swivel connection, and a 6' power cord with GFCI (ground fault circuit interrupter) for operator safety.
4" x 8" (102 x 203 mm) Steel Mold
CA-0260
Location: Parts & Accessories
Manufactured from .25" (6.3 mm) thick seamless steel pipe for durability, body is longitudinally split so mold will spring open when unclamped. All parts plated for corrosion resistance and longer life. Detachable base plate included NOTE: Shipping may vary due to size and weight of this item.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
SA-0100-S
Location: Parts & Accessories
Molds are manufactured from steel with all parts plated for longer life. Wing nuts mount on both sides of collar for easy assembly and stripping. Split molds have two quick-acting clamps.
SA-2015
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 2.416" (61mm) high, 5-15/16" (150.8mm) dia.
