Product Search
Search results for 'C-702'
Showing 141 - 160 of 1124 Total Results
CA-2060
Location: Sieve Brushes
Fine Sieve Brush from Test Mark - Brush fibers are made from long-lasting nylon and is excellent for brushing material from the sieve to the scale pan.
AA-0068
Location: Vacuum Pycnometer (Rice Test)
The vacuum pycnometer from Test Mark is used for determining the maximum specific gravity of bituminous paving mixtures with a maximum aggregate size up to 3/4-inch and a 2,000 g capacity.
CA-0710-01
Location: Concrete
Replacement wash bottle used to insert alcohol into Chase air indicator.
CA-2860-01
Location: Concrete
Sturdy 3-legged painted steel stand is 20.5 in. high with adjustable neoprene rubber feet for leveling and isolation from vibration.
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
(2) options
Location: Hydrometers
Hydrometer jars from Test Mark are used to suspend soil hydrometers in sodium hexametaphosphate solution for determining the amount of soil particles in a dispersed suspension.
Density Drive Sampler, 3" ( 76.2 mm)
SA-1355
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams.. Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks are...
CA-2050
Location: Sieve Brushes
The Wire Sieve Brush from Test mark features a steel wire with loop handle for cleaning coarse series sieves.
Test Mark Industries supplies calibration and service locations for its construction testing equipment.
CA-0360-S
Location: Slump Testing
Test Mark's portable slump test sets consist of a steel slump cone, tamping rod, and cast-aluminum test base with handle for easy transportation.
(4) options
Location: Beam Molds
Steel Concrete Beam Molds from Test Mark are used for molding third or center point test samples.
SA-4010
Location: Dynamic Cone Penetrometer
The Dual Mass DCP Standard Kit from Test Mark measures the shear strength of soil with a CBR between 0.5 - 100%.
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
CA-2570
Location: LA Abrasion
The LA Abrasion Machine from Test Mark tests crushed rocks, slag and gravel for resistance to abrasion.
Circulating Water Bath, Digital
AA-0065
Location: Circulating Water Bath
The circulating water bath from Test Mark is fully insulated with magnetic circulator for heating up to 12 4-inch diameter Marshall samples at a time.
Feeler Gauge Set, .002 to .025
CA-0485
Location: Planeness/Thickness Gauges
When used with the steel parallel bar, Test Mark's feeler gauge will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
SA-0662
Location: Hydrometer Jar
Hydrometer jars are used to suspend soil hydrometers in sodium hexametaphosphate solution for determining the amount of soil particles in a dispersed suspension.
CA-0890
Location: Sling Psychrometer
The Sling Psychrometer from Test Mark determines relative humidity with a matched pair of organic filled 20-120° F x 1° thermometers to measure wet and dry bulb temperatures.
