Product Search
Search results for 'C-511'
Showing 221 - 240 of 1124 Total Results
(4) options
Location: Centrifuge Extractors for Asphalt
Centrifuge Extractors from Test Mark are designed for use in the separation of asphaltic mixtures to determine bitumen percentage.
Digital Dial Indicator, 220/50
CA-2950-DD50
Location: Cement
Replacement Digital Dial Indicator for Comparator, 220 V, 50 Hz.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
(6) options
Location: Plastic
Plastic beakers from Test Mark feature no-drip spout for easy pouring, these beakers are translucent, chemical resistant, and stack without sticking together.
Spacers for CM-4000 and CM-5000 Series
(2) options
Location: Spacers
Spacer Assembly for Compresson Machines is used to adjust the inside vertical testing height of the compression machine load frame for testing samples of various heights.
(4) options
Location: Desiccator Jar
The Desiccator Jar from Test Mark features a heavy walled annealed jar has finely ground flanges and cover knob.
CA-0280-L
Location: Cube Molds
Polypropylene water tight disposable liners used with cube maker system. Sold 200 per carton.
Drierite Dessicant, 1 lb. white
AA-0124
Location: Drierite
Protects vacuum pump by removing final trace of moisture. Must be used with blue indicating drierite.
CA-0810
Location: Planeness/Thickness Gauges
Test Mark's magnifying crack comparator simply monitors cracks in concrete and masonry structures.
AA-0069
Location: Vacuum Pycnometer (Rice Test)
Heavy-duty vibrating table, with variable-speed control, keeps sample material loose for more reliable test results - from Test Mark Industries.
CA-4006
Location: Concrete
Gold probes have a 56% greater cross-sectional area than the silver and are recommended for lightweight concrete less than 125 lbs./cu. ft. (2003 kg/M³) in density. Set of 3.
Perpendicular Verification Device
(3) options
Location: Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
CA-0280-P
Location: Cube Molds
The high-density polyethylene three-gang mold for 2-inch cubes strips and reassembles easily. Easy ordering online from Test Mark Industries.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
SA-3501
Location: Marsh Funnel
The Marsh Funnel provides quick measurements for reporting mud consistency. Fluid viscosity if the ratio of speed of the sample as it passes through the outlet tube (shear rate) to the amount of force (fluid weight) that is causing the fluid to flow (shear stress). Frequent reporting will show...
CA-4005
Location: Concrete
The silver probe is used with concrete having a density greater than 125 lb./cu. ft. (2003 kg/M³). Set of 3.
SA-1120
Location: Manometer Tubes
The economical, wall mount Manometer Tube from Test Mark is built for use with many permeameters.
