Product Search
Search results for 'D-2041'
Showing 541 - 560 of 1648 Total Results
CA-0700-02
Location: Concrete
Replacement cup and stopper for measuring concrete mortar in Chase air indicator testing.
CA-0110
Location: Parts & Accessories
These heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder. Place cylinders against adjustable guides on vertical arms for precise...
3" x 6" & 2" x 4" Vertical Capper
CA-0130
Location: Parts & Accessories
These heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder. Place cylinders against adjustable guides on vertical arms for precise...
CA-2160
Location: Door Enclosure
Lightweight, easily removable door panel designed to minimize dust and noise. Sturdy fiberboard door has a full-width hinge and sound deadening liner to cover the top and front openings.
(6) options
Location: Glass Thermometers
Test Mark provides glass thermometers, mercury or organic filled, as part of a complete line of materials testing equipment.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
Perpendicular Verification Device
(3) options
Location: Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
Perpendicular Verification Device, 6" x 12" Cylinders
CA-0295
Location: Parts & Accessories
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
SA-0220
Location: Sand Density
Density Sand is used with the sand density apparatus to determine the bulk density of soil.
CA-0500-42
Location: Air Meter Calibrators
Brass reusable calibration vessel can be used with any 1/4 cu. ft. concrete pressure meter. Vessel is exactly 5% air by volume when placed in the pressure meter base. Part of our air meter calibrator products.
(2) options
Location: Parts & Accessories
Test Mark hand augers feature heavy-gauge heat treated steel, zinc plated for rust resistance. Order online securely.
SA-3501
Location: Marsh Funnel
The Marsh Funnel provides quick measurements for reporting mud consistency. Fluid viscosity if the ratio of speed of the sample as it passes through the outlet tube (shear rate) to the amount of force (fluid weight) that is causing the fluid to flow (shear stress). Frequent reporting will show...
No. 200 Wet Wash 8" x 4" with back up cloth
CA-2002
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Backing cloth adds extra support.
CA-2005
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Models with backing support cloth are also available.
No. 200 Wet Wash 8" x 8" with back up cloth
CA-2007
Location: Parts & Accessories
These wet washing sieves have an extra deep frame to contain water, so fines are washed through the No. 200 mesh sieve without losing any portion of the sample. Sieves have brass frames and permanently installed stainless steel cloth. Backing cloth adds extra support.
