Product Search
Search results for 'C-535'
Showing 41 - 60 of 1123 Total Results
(3) options
Location: Test Platens
Used to determine the splitting tensile strength of concrete cylinders. . The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of...
(2) options
Location: Galvanized Pans
Galvanized material pans from Test Mark are used for performing concrete and aggregate test preparation.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
AA-0069
Location: Vacuum Pycnometer (Rice Test)
Heavy-duty vibrating table, with variable-speed control, keeps sample material loose for more reliable test results - from Test Mark Industries.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
CA-0356-L
Location: Self-Consolidating Concrete
L-Box Flowability is a method used to determine flow rates and passibility of SCC in confined spaces. Available from Test Mark Industries.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
Drive Tubes, 3" x 2.75" (76.2 x 69.9 mm), 10/pkg
SA-1371
Location: Density Drive Sampler
For use with Drive Sampler, 3" (76.2mm) x 2.75" (69.9mm) length, (3" x 0.01 ft3). Accessory to the density drive sampler.
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
Speedy 2000 Moisture Tester 20 gr.
SA-0250
Location: Moisture Testing
The Speedy 2000 Moisture Tester from Test Mark is widely accepted for determining the free moisture content of a variety of materials - sand, aggregates, soil and other powders.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
CA-0289
Location: Grout Sample Box
The grout sample box from Test Mark features engineered-slotted corrugation which retains moisture while simulating CMU absorption rate.
CA-2170
Location: 30 Minute Timer
Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.
AA-0300
Location: Asphalt Mixer
Test Mark's asphalt/concrete mixer is ideal for sample or batch mixing in either laboratory or field. Easy and secure ordering online.
CA-2950
Location: Comparator, Length Change
The Comparator from Test Mark Industries measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
(4) options
Location: Test Platens
Test both cubes and cylinders . Used for testing 2” (50 mm) cubes and 3” (76 mm) diameter cylinders and cores in compression. Cube test set consists of a spherically seated platen assembly and a lower pedestal used for positioning the cube sample at the correct height for testing. The bearing block...
AA-0005
Location: Marshall Basic Compression Testing
The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.
Drive Tubes, 4" x 5.00" (101.6 x 127 mm), 10/pkg
SA-1372
Location: Density Drive Sampler
For use with Drive Sampler, 4" (101.6mm) x 5" (127mm) length, (4" x 0.033 ft3).
(5) options
Location: Unit Weight Buckets
Aluminum cylindrical unit weight measures from Test Mark have machined interior surfaces, carrying handles, true and even top and bottom surfaces, are water-tight and will retain form after repeated use.