Product Search
Search results for 'D1587'
Showing 41 - 60 of 1648 Total Results
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers.. The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel with...
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
(2) options
Location: Sample Bags
Plastic-lined sample bags from Test Mark are used to transport soils, cement, aggregate, and wet materials from the field to the laboratory.
Masonry Series Testing Machines
(8) options
Location: Manual Compression Testing Machines
Available in Automatic and Manual Control Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products.. Request a Quote...
(3) options
Location: Aggregate Washers
Aggregate samples are automatically washed with Test Mark's aggregate washers to remove clay and other fines passing a No. 200 sieve.
TS17 Touchscreen Load Indicating System
TS17
Location: Digital Load Indicating Systems
Test Mark is proud to introduce the TS17 touchscreen digital load indicating system for concrete compression testing machines. The controller’s 7'' full color waterproof screen uses large, easy-to-read, alphanumeric characters to simultaneously display live load, sample stress, and rate of loading...
Perpendicular Verification Device
(3) options
Location: Verification Device
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
Perpendicular Verification Device, 6" x 12" Cylinders
CA-0295
Location: Parts & Accessories
The Perpendicular Verification Device is used to verify the alignment of 6" x 12" and 4" x 8" concrete cylinders when using un-bonded caps, as required by ASTM C-39. The device rests on the lower platen of the compression machine, avoiding contact with your retainer rings. Simply center the...
CA-2181
Location: Parts & Accessories
Unit supplied with a permanent water connect with regulator valve, tubing, saddle valve, stainless-steel goose-neck water tube with swivel connection, and a 6' power cord with GFCI (ground fault circuit interrupter) for operator safety.
Copper Condenser w/inlet, outlet tubes
AA-1004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-1004; Test Mark Industries.
Copper Condenser w/inlet, outlet tubes
AA-2004
Location: Asphalt
Copper condenser with inlet and outlet tubes. Product AA-2004; Test Mark Industries.
TM-2270
Location: Digital Load Indicating Systems
The new TM-2270 is an easy-to-use economical Digital Load Indicator loaded with features found in more expensive units.
Straight-Edge 1/8" x 1 1/4" x 8" long (3 x 32 x 200 mm)
SA-0114
Location: Flow Tables
Straightedges are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
SA-1300
Location: Probe Rod
The Steel Probe Rod from Test Mark is used for locating soft zones in and under compacted areas in sub-grades and footing excavations.
300K Compression Machine, iD Digital, 1/2 hp
CM-3000-iD
Location: Parts & Accessories
CM-3000 300,000 lbs./1334 kN Capacityü Accuracy and testing range of + .5% of indicated load from 1% to full machine capacity exceeds ASTM C-39 and E-4 specifications.ü Quiet running continuous duty hydraulic pumpsü Rigid load frames exceed ACI 363 frame elongation requirementsü Four digital...
Fresh Concrete Field Testing Kits, 4" x 8"
CA-0515
Location: Fresh Concrete Field Testing
Fresh concrete kit (4" x 8") contains everything you need for routine testing of fresh concrete testing in the field, with all items meeting ASTM standards.
6" Test Cylinder Transport Rack
CA-0215
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 6x12 test cyliners with anchoring holes which allow rack to be secured to truck bed.
Concrete Cylinder Length Measuring Device for 4 & 6''Dia-24''L
CA-0237
Location: Core Length
With the core length measuring device measurements can be taken at the center point of the sample's upper end as well as the 8 equidistant points along the circumference.
CA-0191-50
Location: Parts & Accessories
Our pad-cap retainer rings hold neoprene pads that fit into the ends of concrete test cylinders. Made from plated high-alloy steel to resist rust and deformation fatigue. Bearing surfaces machine-planed to within 0.002". Supplied two per set. These neoprene pad inserts are made from a tough...
