Product Search
Search results for 'D-2167'
Showing 61 - 80 of 1648 Total Results
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
Metric Individual Calibration Weights
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weights from Test Mark include a Statement of Accuracy from the manufacturer.
Wire Cloth Field Rocker Screen Set
CA-1570
Location: Field Rocker Screen Set
The field rocker screen set from Test Mark Industries consists of a 12-inch square steel frame with interchangeable wire cloth and bottom pan.
SA-0322
Location: Parts & Accessories
The Motorized Liquid Limit Machine gives uniform testing with greater degree of accuracy and includes a geared motor to give proper operating speed. This unit is mounted to a metal plate with rubber feet. All units include a brass cup, hand mechanism with carriage and crank mounted on a hard rubber...
Triple Beam Balance, 2610 g x 0.1 g
SC-0035
Location: Parts & Accessories
Test Mark's Triple Beam Balance features magnetic damping, three graduated-tier beams, 6-inch dia. stainless steel weighing pan, weight set, below balance weighing with unique removable tripod legs and weigh-below hook, larger more stable base, factory installed security built into base and...
(4) options
Location: Cylinder Molds - Steel
Test Mark Industries features steel concrete cylinder molds as part of a complete line of concrete testing equipment.
CA-2500
Location: Sample Splitters
The Test Mark mini sample splitter accurately divides dry materials, such as cement, powdered ores, coal, coke, sand, soils and other fine aggregates, so each half is representative of the original total sample.
(3) options
Location: Beam Balance
Triple Beam Balance features magnetic damping, three graduated-tier beams, larger more stable base, factory installed security built into base and positive poise positioning, all standard.
CA-0238
Location: Parts & Accessories
These pi-tape gauges are ideal for measuring the diameter of concrete cylinders, soil, and asphalt samples. One reading provides a direct reading of average diameter of both round or out-of-round cylinders and cores. Guaranteed to provide +/- .001" (.03 mm) accuracy. Includes certificate of...
CA-0238-M
Location: Parts & Accessories
These pi-tape gauges are ideal for measuring the diameter of concrete cylinders, soil, and asphalt samples. One reading provides a direct reading of average diameter of both round or out-of-round cylinders and cores. Guaranteed to provide +/- .001" accuracy. Includes certificate of calibration.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams.. Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks are...
CA-2700
Location: Specific Gravity Flasks
The Chapman flask from Test Mark has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates.
10 ml Graduated Glass Cylinder, 0.2 ml subdiv
SA-0709
Location: Parts & Accessories
Bomex double metric scale graduated glass cylinders with round base.
10 ml Graduated Plastic Cylinder
SA-0709-P
Location: Parts & Accessories
Polypropylene graduated cylinders have a single scale with raised numerals for easy reading. Flared top rim and large spout facilitates pouring and hexagon shaped base provides stability. Chemically resistant and autoclavable at 121° C (250° F). Translucent. NOTE: Orders of 10 or more cylinders...
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
SA-2250
Location: Mechanical Soil Compactor
The automatic soil compactor from Test Mark is designed to automatically compact soil samples rapidly and produce a uniform degree of compaction.
CA-4000
Location: Windsor Probe
The Windsor Probe from Test Mark evaluates the compressive strength of in-place concrete. Easy online ordering.
(3) options
Location: Test Platens
Used to determine the splitting tensile strength of concrete cylinders.. The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of test...
(6) options
Location: Sample Tins
Test Mark Industries supplies sample tins as part of a complete line of soil testing equipment.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
