Product Search
Search results for 'T-304'
Showing 61 - 80 of 1648 Total Results
CA-0910
Location: Parts & Accessories
The deluxe concrete curing box from Test Mark Industries can hold up to 22 standard 6 x 12 concrete test cylinders.
SA-2000
Location: CBR Load Frames
The CBR (California Bearing Ratio) loading press from Test Mark uses a two-position mechanical jack to provide steady test speeds, as well as rapid travel of the platen for positioning of the sample.
CA-3000
Location: Flow Tables
Hand driven flow tables are used to determine consistency of cement mortars. A test specimen is molded on the table to a specified volume and shape.
CA-2582
Location: Parts & Accessories
The Rebarscope™ enables the user to not only locate reinforcement bars but also determines depth and size. Rebar diameter can be estimated by using a fully automated simple system of comparison. Feedback to the user can be made via the digital screen or via head phones. Optional software allows the...
(3) options
Location: Liquid Limit Testing Machines
Liquid limit machines from Test Mark are part of a complete line of soil testing equipment and supplies.
(3) options
Location: Spacers
Spacers are used to adjust the vertical testing height inside compression testing machine load frames when testing samples of various heights. Spacer mounts to the top cross head of the load frame. Spacer is manufactured from steel and is precision ground on both ends and painted for rust...
Compression Machine Mounting Stands
(3) options
Location: Compression Machine Mounting Stands
Compression Machine Mounting Stands are made of steel plate with the top plate and bottom flange parallel. Bolts and washers are included for securing the compression frame to the stand. Mounting stand elevates the compression machine 24.5” off the floor for the operator’s convenience & safety when...
Non-Mercury Min/Max Thermometer
CA-0790-A
Location: Min/Max Thermometers
Mercury free, environmental friendly spirit filled thermometer. This dual-scale min/max thermometer has U-shaped capillary mounted in a rugged plastic case with eye hole for wall mounting. Indicates present temperature and the highest/lowest temperature since last reset.
CA-2560
Location: Sample Splitters
The adjustable sample splitter from Test Mark reduces aggregates to a suitable size and amount for gradation testing.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
AA-0095
Location: Vacuum Pump
Direct-drive, two-stage, rotary-sliding, vane-high vacuum pump features a gas ballast and trap to reduce risk of oil being sucked into the system.
(2) options
Location: Curing Boxes
Portable Curing Boxes for concrete testing store up to 22 standard 6x12 test cylinders from Test Mark Industries.
CA-2181
Location: Parts & Accessories
Unit supplied with a permanent water connect with regulator valve, tubing, saddle valve, stainless-steel goose-neck water tube with swivel connection, and a 6' power cord with GFCI (ground fault circuit interrupter) for operator safety.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
CA-0793
Location: Min/Max Thermometers
Eliminates all of the problems associated with mercury separation and air bubbles trapped in traditional thermometers. Weather resistant rugged plastic case for outdoor use. Displays three independent temperature readings of current, maximum and minimum since last reset.
CA-4030-01
Location: Aggregate
Cylindrical measure has a locating hole to fit a lug on the funnel stand to ensure each sample is tested with precision and repeatability.
MA-1101
Location: Machine Accessory Lift
The machine accessory lift can raise 1,100 pounds easily with a detachable metal handle - changing out breaking heads or adding spacers is quick and easy.
(8) options
Location: Cylinder Molds - Plastic
Test Mark Industries features plastic concrete cylinder molds as part of a complete line of concrete testing equipment.
