Product Search
Search results for 'C403'
Showing 101 - 120 of 1123 Total Results
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
CA-0480
Location: Planeness/Thickness Gauges
Test Marks' steel parallel planeness gauge determines the planeness of testing machine platens, cylinder cappers and other testing accessories.
(2) options
Location: Trowels
Test Mark's strike-off trowels are used to strike off and smooth excess concrete and grout from the surface of molds.
Marshall Automatic Single Compactor, 4" Stationary Mold
AA-0020
Location: Marshall Automatic Compactor
The Marshall Automatic Compactor apparatus from Test Mark compacts samples at a preset number of hammer blows and shuts off on completion.
CA-0890
Location: Sling Psychrometer
The Sling Psychrometer from Test Mark determines relative humidity with a matched pair of organic filled 20-120° F x 1° thermometers to measure wet and dry bulb temperatures.
(2) options
Location: Curing Boxes
Portable Curing Boxes for concrete testing store up to 22 standard 6x12 test cylinders from Test Mark Industries.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
CA-4052
Location: Sand Equivalent
The mechanical motor-driven sand equivalent shaker from Test Mark is recommended for performing sand equivalent tests on a regular basis.
High Strength Capping Compound
CA-0100-HS
Location: Capping Compound
Test Mark's High Strength Capping Compound is easily melted, pours smoothly, has a high compressive strength, and gives consistent test results.
CA-0245
Location: Vibrator
The lightweight electric concrete vibrator from Test Mark vibrates concrete test cylinders and molds in the laboratory or field.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
Voluvessel, 1/20 cu ft capacity
SA-1400
Location: Voluvessel
The Voluvessel from Test Mark is a direct reading instrument that is easily used and requires no calibration. A liquid filled balloon measures hole volume after removal of soil sample.
(2) options
Location: Parts & Accessories
Test Mark hand augers feature heavy-gauge heat treated steel, zinc plated for rust resistance. Order online securely.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
CA-2570
Location: LA Abrasion
The LA Abrasion Machine from Test Mark tests crushed rocks, slag and gravel for resistance to abrasion.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
CA-0285
Location: Cube Molds
The Econ-O-Cube mold from Test Mark forms three 2-inch cubes at one time in a diagonal arrangement. Easy and secure online ordering.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
CA-0280
Location: Cube Molds
The 2-inch (51 mm) diagonal arrangement three-gang bronze cube mold from Test Mark makes three test cubes at a time.
CA-1485
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side provide uniform temperature.
