Product Search
Search results for 'E-1907'
Showing 101 - 120 of 1124 Total Results
Mortar Penetration Resistance Apparatus
CA-2830
Location: Mortar Penetration Resistance
The mortar penetration resistance apparatus from Test Mark Industries determines the time of setting of concrete by penetration resistance.
SA-0245
Location: Shear Vane Tester
The pocket shear vane tester from Test Mark provides a quick and efficient method for determining shear strength values of cohesionless values of soils.
CA-0791
Location: Min/Max Thermometers
This Digital Thermometer registers minimum and maximum temperatures in both Fahrenheit and Celsius. Temperature range is 32 to 122°F and 0 to 50°C. Large display shows humidity, temperature and time. Thermometer also serves as an alarm clock.
SA-0360
Location: Soils
Glass plate with ground finish on one side and seamed edges. Dimensions: 12" x 12" x 3/8" thick.
AA-2055
Location: Vacuum Extractor
Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
CA-3125
Location: Vicat Apparatus
The Plastic Conical Mold from Test Mark is used with all Vicat Apparatus as part of a complete cement testing solution.
CA-0280-L
Location: Cube Molds
Polypropylene water tight disposable liners used with cube maker system. Sold 200 per carton.
CA-0205
Location: Pad Cap Quick Release Powder
For quick release of pads from unbonded capping system. Powder is a lubricant and bond breaker that extends pad life. Kit includes 8 oz. powder dispenser and 48 oz. of refill powder.
(4) options
Location: Test Platens
Test both cubes and cylinders. Used for testing 2” (50 mm) cubes and 3” (76 mm) diameter cylinders and cores in compression. Cube test set consists of a spherically seated platen assembly and a lower pedestal used for positioning the cube sample at the correct height for testing. The bearing block...
CA-2700
Location: Specific Gravity Flasks
The Chapman flask from Test Mark has two bulbs for determining approximate percentage of voids and surface moisture in fine aggregates.
(3) options
Location: Reference Thermometer
Test Mark Industries provides reference thermometers as part of a complete line of materials testing supplies.
(4) options
Location: Crack Monitors
Concrete crack monitors from Test Mark are simple, accurate devices for monitoring crack movement.
CA-0850
Location: Concrete Penetrometer
The Concrete Pocket Penetrometer from Test Mark is lightweight for field and lab evaluation of the initial set of concrete mortar based on ASTM C-403.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
CA-4030
Location: Void Content
The void content apparatus from Test Mark is used to determine the non-compacted void content of a fine aggregate sample.
CA-0360-P
Location: Slump Testing
Test Mark's plastic slump cones for concrete testing are more economical than metal cones and will not rust or dent.
(3) options
Location: Beam Balance
Triple Beam Balance features magnetic damping, three graduated-tier beams, larger more stable base, factory installed security built into base and positive poise positioning, all standard.
Cylinder Platen, 6 ½” Diameter
(3) options
Location: Test Platens
Free floating bearing platen seats under test pressure.. Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101 mm)...
CA-0880
Location: Stopwatch, Digital
Stopwatch has a large LCD display counts up to 24 hours, 59 minutes, 59 seconds. Unit has clock and calendar functions. Stopwatch comes with a detachable lanyard.
