Product Search
Search results for 'T245'
Showing 141 - 160 of 1124 Total Results
CA-2590
Location: Moisture Encounter
The concrete moisture encounter from Test Mark provides an instantaneous, nondestructive moisture measurement on concrete floors.
CA-1515-S
Location: Sifter, Laboratory
Designed to accept up to 10 - 8" dia. full height sieves or 6 12" dia. intermediate height sieves plus pan and cover. Sifter quietly rotates and taps sieve frame from below with plastic composite tamper.
SC-0065
Location: Scales
This Stainless Steel Scoop is used to contain liquid or powder material being weighed on Triple Beam Balance. The stainless steel construction is ideal for weighing hot mix material with a convenient spout for quick, neat pouring of materials. Comes with a hanging counterweight to compensate for...
CA-0480
Location: Planeness/Thickness Gauges
Test Marks' steel parallel planeness gauge determines the planeness of testing machine platens, cylinder cappers and other testing accessories.
Liquid Limit (w/counter) Test Set
SA-0310-S
Location: Liquid Limit Test Sets
Liquid limit test sets with counters are available as part of complete line of soil testing products from Test Mark Industries.
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen.. The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
CA-0600-P
Location: Air Entrainment/Roll-A-Meter
The PVC and fiberglass reinforced Roll-A-Meter from Test Mark measures entrained air in any type of concrete, including lightweight mixes.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
CA-0789
Location: Min/Max Thermometers
Test Mark's min-max thermometer indicates present temperature and the highest/lowest temperatures since last reset.
SA-0362
Location: Plastic Limit
Test Mark's Plastic Limit Roller for soils is a unique time-saving device designed to produce consistent results by an easily repeatable mechanical technique.
Screen Shaker Hydraulic Clamping
CA-2101
Location: Shakers
Test Mark provides screen shaker hydraulic clamping for aggregate testing applications. Order yours online today!.
CA-2900
Location: Cube Molds
Cement Cube Sand from Test Mark is used for preparing hydraulic cement mortars for 2-inch (51 mm) cube compression testing.
Stripping Tool, Aluminum Handle
CA-0240-A
Location: Stripping Tool
The durable stripping tool has a large easy-grip aluminum handle and a steel shaft. Quickly remove concrete specimens from single use plastic cylinder molds.
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
(2) options
Location: Trowels
Test Mark's strike-off trowels are used to strike off and smooth excess concrete and grout from the surface of molds.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
SA-0340
Location: Resiliency Tester
The Resiliency Tester is used to test resiliency of hard rubber base of liquid limit machines, which should be done at 90-day intervals to ensure base is in compliance with ASTM Standards.
