Product Search
Search results for 'T164 (Method B)'
Showing 1 - 20 of 33 Total Results
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
CA-0700
Location: Chase Air
The Chase Air Indicator from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
AA-2055
Location: Vacuum Extractor
Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
Magnet Holder with Swivel Adapter Yoke
SA-2021
Location: CBR Accessories
Convenient, portable method of mounting dial indicators. Holder's Alnico magnetic base mounts on flat or curved metallic surfaces. Indicator can me mounted in almost any position.
(2) options
Location: Permeameters
The Compaction Permeameter from Test Mark is used for determining permeability of clay, sand and gravel soils using the Proctor plasticity compaction method.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
SA-1050
Location: Dispersion Mixer
Test Mark's soil mixer is for dispersing solid suspensions used in hydrometer method of testing sub-grade soils.
SA-0245
Location: Shear Vane Tester
The pocket shear vane tester from Test Mark provides a quick and efficient method for determining shear strength values of cohesionless values of soils.
High Strength Capping Compound
CA-0100-HS
Location: Capping Compound
Test Mark's High Strength Capping Compound is easily melted, pours smoothly, has a high compressive strength, and gives consistent test results.
CA-2165
Location: Clean-N-Weigh
The Clean-N-Weigh accessory offers the fastest and most efficient method of processing large, coarse aggregate samples for particle size tests.
(3) options
Location: Vapor Emissions Test Kit
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations.
Vapor Emission Test Kit, 3 per pkg.
CA-2594
Location: Parts & Accessories
The vapor emission test method is specified by the Floor Covering Industry as the primary measure of moisture acceptable for floor covering or coating installations. Product has three per package.
CA-0356-L
Location: Self-Consolidating Concrete
L-Box Flowability is a method used to determine flow rates and passibility of SCC in confined spaces. Available from Test Mark Industries.
(8) options
Location: Manual Compression Testing Machines
Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...
Compaction Permeameter, 4"W x 4"D x 12"H (102 x 102 x 305 mm)
SA-1180
Location: Parts & Accessories
For determining permeability of clay, sand, and gravel soils, this unit uses the Proctor plasticity compaction method. Two-piece cylindrical mold includes upper plate with valve, water inlet/outlet, filter base plate and filter stones.
CA-1202
Location: Parts & Accessories
Concrete crack monitors provide a simple, accurate method for monitoring crack movement. Monitor features stamped crosshairs and grid with two acrylic plates which move independently. Each crack monitor comes with a graph for periodic recording of movement. Monitors may be installed using Quick-set...
250K Compression Machine, 2270 Digital, 3/4 hp
CM-2500-2270P
Location: Parts & Accessories
CM-2500 Series 250,000 lbs./1,112 kN Capacity Accuracy of + .5% of indicated load from 2,500 to 250,000 lbs. (11 – 1,112 kN), Four digital load indicating systems to choose from, select a basic budget minded unit or. an advanced model with automatic stress calculation display. Quiet running...
