Product Search
Search results for 'M-205'
Showing 201 - 220 of 1124 Total Results
Metric Individual Calibration Weights
Location: Parts & Accessories
Metric economical ANSI/ASTM Class 7 weights from Test Mark include a Statement of Accuracy from the manufacturer.
AA-2000
Location: Reflux Extractor
The Reflux Extractor Set from Test Mark, used for asphalt testing, features 2 cones, each with a 1000g capacity.
(4) options
Location: Test Platens
Test both cubes and cylinders. Used for testing 2” (50 mm) cubes and 3” (76 mm) diameter cylinders and cores in compression. Cube test set consists of a spherically seated platen assembly and a lower pedestal used for positioning the cube sample at the correct height for testing. The bearing block...
CA-1410
Location: Lab Ovens
These gravity convection laboratory ovens are used for drying, baking, sterilizing, evaporating, heat-treating, and testing. 2.0 cu. ft. model.
SA-0241
Location: Soils
Adapter Foot is recommended when testing extremely low strength cohesive soils.
Permeability Compaction Hammer
SA-1126
Location: Permeability Compaction
Test Mark's Permeability Compaction Hammer is part of a complete line of soil testing supplies and equipment.
CA-1990
Location: Wet Washing Spray Apparatus
Test Mark's Wet Wash Spray Apparatus consists of a valve, pressure gauge, piping and spray nozzle.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
CA-2585
Location: Rebar Electronic Metal Detector
Test Mark's hand-held electronic metal detector locates rebars, metal pipe and conduit through concrete up to depths of 6 inches.
Marshall Automatic Double Compactor, 4" Rotating Mold
AA-0022
Location: Marshall Automatic Compactor
Automatically compacts two samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
Marshall Automatic Triple Compactor, 4" Rotating Mold
AA-0024
Location: Marshall Automatic Compactor
Automatically compacts three samples at a preset number of hammer blows and shuts off automatically on completion. Unit includes compactor, automatic counter, oak pedestal and 4" mold.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
CA-0286
Location: Cube Molds
The 2-inch cube maker molding system from Test Mark uses watertight polypropylene liners which fit into a 3-gang metal mold frame.
(3) options
Location: Straight-Edges
Straightedges from Test Mark are for striking-off samples in molds or containers. Made of ground steel with beveled edges.
6" Test Cylinder Transport Rack
CA-0215
Location: Cylinder Transport
The test cylinder carrying case from Test Mark holds 8 - 6x12 test cyliners with anchoring holes which allow rack to be secured to truck bed.
SA-0200
Location: Sand Density
The Sand Cone Density Apparatus from Test Mark Industries determines the in-place density of soils.
CA-2980-03
Location: Aggregate
Chart has five permanent reference colors mounted in a durable protective plastic case.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
SA-2015
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 2.416" (61mm) high, 5-15/16" (150.8mm) dia.
SA-2015-L
Location: CBR Accessories
Disc is used as a false bottom in a soil mold during the compaction process. Plated rust-resistant steel disc is 1.416" (36mm) high, 5-15/16" (150.8mm) dia.
