Product Search
Search results for 'T-197'
Showing 61 - 80 of 1123 Total Results
(2) options
Location: Rebar Locator
Test Mark's Rebarscope™ locates reinforcement bars in concrete and determines their depth and size.
(2) options
Location: Flow Cones
The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.
CA-1485
Location: Muffle Furnace
Test Mark's small bench-top muffle furnace features heating elements on top and side provide uniform temperature.
High Strength Capping Compound
CA-0100-HS
Location: Capping Compound
Test Mark's High Strength Capping Compound is easily melted, pours smoothly, has a high compressive strength, and gives consistent test results.
Marshall Compaction Rotating Mold, 4"
AA-0046
Location: Marshall 4" Compaction Molds
Marshall Compaction Rotating Mold is used for preparing test specimens with rotating mold compactors - from Test Mark Industries.
AA-2055
Location: Vacuum Extractor
Vacuum Extractor from Test Mark is used for quantitative determination of bitumen in hot-mixed paving mixtures and pavement samples.
(2) options
Location: Trowels
Test Mark's strike-off trowels are used to strike off and smooth excess concrete and grout from the surface of molds.
CA-2745
Location: Specific Gravity Bench
200 watt heater/circulator is attached to a stainless steel bracket that hangs on the water tank to maintain constant temperature.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
(5) options
Location: Prism Molds
1 Gang Molds from Test Mark are designed to produce the required 10-inch gauge length prism molds. Easy and secure ordering online.
CA-0915
Location: Specimen Curing
Portable curing chest is lightweight and easily folded for storage. Made with advanced polymers and vinyl with 1/2" cooler foam, chest holds up to eight (9) 6" x 12" concrete test cylinders.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
CA-2170
Location: 30 Minute Timer
Plug aggregate equipment into the outlet at the back of the timer. Then plug timer cord into a wall outlet and turn the knob to the desired time. Time switch will turn off equipment automatically when time expires.
(6) options
Location: Concrete Sensors
Durable, waterproof concrete sensors that monitor the environmental conditions within the concrete as it hardens. Models are available for both temperature and relative humidity monitoring.
(5) options
Location: Unit Weight Buckets
Aluminum cylindrical unit weight measures from Test Mark have machined interior surfaces, carrying handles, true and even top and bottom surfaces, are water-tight and will retain form after repeated use.
MA-0135
Location: Concrete Cylinder Loading Shelf, CM-2500 Series
Easier loading of 6” cylinders in CM-2500 series machines. . This optional shelf was designed to make loading and positioning of 6” (152 mm) cylinders with pad cap rings both easier and safer in a CM-2500 series machine. The shelf features a heavy-duty steel design with a plastic laminated top, so...
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
Digital Static Cone Penetrometer
SA-1510
Location: Static Cone Penetrometer
Digital Static Cone Penetrometer from Test Mark features a large digital readout making testing and recording readings easy.
AA-0035
Location: Asphalt
Holder mounts on compaction pedestal and centers the compaction mold over the center of the post. Mold holder keeps mold, collar and base plate securely positioned during compaction.
CA-3032
Location: Flow Tables
Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.
