Product Search
Search results for 'D-2217'
Showing 81 - 100 of 1644 Total Results
CA-0460
Location: Parts & Accessories
Strike-off Trowels are used to strike off and smooth excess concrete and grout from the surface of molds. Used for mixing cement, concrete and soil samples.
CA-0850
Location: Concrete Penetrometer
The Concrete Pocket Penetrometer from Test Mark is lightweight for field and lab evaluation of the initial set of concrete mortar based on ASTM C-403.
Feeler Gauge Set, .002 to .025
CA-0485
Location: Planeness/Thickness Gauges
When used with the steel parallel bar, Test Mark's feeler gauge will determine the planeness of testing machine platens, cylinder cappers and other testing accessories.
CA-2180
Location: Parts & Accessories
Aggregate samples are automatically washed to remove clay and other fines passing a No. 200 sieve. Inconsistencies and the high cost of manual methods are eliminated.
CA-2060
Location: Sieve Brushes
Fine Sieve Brush from Test Mark - Brush fibers are made from long-lasting nylon and is excellent for brushing material from the sieve to the scale pan.
(3) options
Location: Aggregate Washers
Aggregate samples are automatically washed with Test Mark's aggregate washers to remove clay and other fines passing a No. 200 sieve.
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
CA-0300
Location: Parts & Accessories
Lightweight steel beam molds are used for molding third or center point test samples. Molds are hinge free to collapse into interchangeable parts for easy stripping, cleaning and quick reassembly with wing nuts.
CA-2980
Location: Organic Impurities
The Organic Impurities Test Set from Test Mark determines the presence of injurious organic compounds in sand used in mortar or cement.
CA-2950-D
Location: Comparator, Length Change
The Digital Comparator from Test Mark measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
(8) options
Location: Manual Compression Testing Machines
Available in Automatic and Manual Control Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty...
Straight-Edge 1/8" x 1 1/4" x 12" long (3 x 32 x 305 mm)
SA-0115
Location: Soils
Straightedge is for striking-off samples in molds or containers. Made of ground steel with beveled edges.
SA-0362-01
Location: Soils
Special adhesive backed absorbent paper that adds no fiber to soil samples. Sold 50 sheets per package.
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
SA-0301
Location: Parts & Accessories
Liquid limit machines by Test Mark feature a suspended brass cup which sets the height of the drop from a thumb screw in the back.
CA-2950
Location: Comparator, Length Change
The Comparator from Test Mark Industries measures length changes of hardened cement paste, mortar, and concrete prismatic specimens.
(4) options
Location: Test Platens
Models available for testing up to 12” (305 mm) CMUs.. All models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion resistance. The bearing block...
(3) options
Location: Test Platens
Used to determine the splitting tensile strength of concrete cylinders.. The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of test...
