Product Search
Search results for 'D-6926'
Showing 101 - 120 of 1123 Total Results
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
CA-0286
Location: Cube Molds
The 2-inch cube maker molding system from Test Mark uses watertight polypropylene liners which fit into a 3-gang metal mold frame.
SA-0109-L
Location: CBR Accessories
LBR mold. 6" ID x 6" H with 2" detachable collar. Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. LBR requires Spacer Disc, sold separately.
(7) options
Location: Graduated Cylinders
Polypropylene graduated cylinders from Test Mark have a single scale with raised numerals for easy reading.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
High Capacity Series Compression Testing Machines
(3) options
Location: Manual Compression Testing Machines
Accuracy range of ±.5% of indicated load from 1% to machine capacity. . Request a Quote High capacity series machines feature rigid distortion-resistant load frames that are designed to meet the demands of testing high-performance concrete in a production testing program, where accurate and...
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
CA-0952
Location: Test Hammer (Rebound)
The easy-to-use concrete test hammer from Test Mark gives consistent concrete strength test estimates within a range of 1,500 to 8,000 psi.
AA-0120
Location: Drierite
Easily installs in-line between vacuum pump and rice test equipment. Refillable unit measures 2 5/8" by 11 3/8" with hose barbs at both ends which will accept ¼" to 3/8' flexible tubing. One of our Drierite products.
Aquaprobe™ Soil Moisture Meter
(2) options
Location: Soil Moisture Meters
Aquaprobe from Test Mark can determine the soil moisture content of different types of soils and other fine aggregate.
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
(3) options
Location: Stainless Steel Pans
Test Mark's rugged Stainless Steel Pans are used for mixing soils and grout samples, weighing samples, drying samples in ovens and storing/transporting materials.
Digital Infrared Non-Contact Thermometer
CA-0733-R
Location: Digital Infrared Non-Contact Thermometer
The Digital Infrared Non-Contact Thermometer from Test Mark features a surface temperature measuring range of -31 to 689° F (-35 to 365° C), laser On/Off function, resolution of 0.5° F (0.2° C), accuracy of + 2.7°F (+ 1.5°C), °C/°F switchable, emissivity 0.95 or 0.70, auto power off. Operates on 2...
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
CA-0280
Location: Cube Molds
The 2-inch (51 mm) diagonal arrangement three-gang bronze cube mold from Test Mark makes three test cubes at a time.
SA-1800
Location: Soil Grinder
Soil grinder prepares soil samples to designated particle size for accurate and repeatable test results. Unit grinds a one-pint sample in 15 seconds. Includes a No. 10 perforated stainless plate.
SA-1300
Location: Probe Rod
The Steel Probe Rod from Test Mark is used for locating soft zones in and under compacted areas in sub-grades and footing excavations.
CA-0285
Location: Cube Molds
The Econ-O-Cube mold from Test Mark forms three 2-inch cubes at one time in a diagonal arrangement. Easy and secure online ordering.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
CA-1302
Location: Hot Plates
Durable die-cast single burner hot plate features high, medium, low and warm temperature settings. Power-on indicator light. Easy to use and clean.
