Product Search
Search results for 'D2434'
Showing 1 - 20 of 1123 Total Results
Constant Head Permeameter Cell
(5) options
Location: Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
SA-1120
Location: Manometer Tubes
The economical, wall mount Manometer Tube from Test Mark is built for use with many permeameters.
Constant/Falling Head Permeameter Set
(5) options
Location: Permeameter Sets
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
iD-Indicator
Location: Digital Load Indicating Systems
Dual operating language option – display all test setup menu programs in either English or Spanish., Automatically calculates and displays peak stress at the end of a test. . Digital display in English Digital display in Spanish The iD indicator is the system of choice for testing programs where...
Masonry Series Testing Machines
(8) options
Location: Manual Compression Testing Machines
Test blocks, masonry prisms, pavers and retaining wall units., Testing range from 1% to full machine capacity, with an accuracy of ±.5% of indicated load., Optional accessories for testing a full range of concrete and cement products. . Request a Quote Masonry series machines are available in two...
SA-1150
Location: Shelby Tube Permeameter
The Shelby Tube Permeameter from Test Mark allows you to perform permeability tests on undisturbed soil samples.
(8) options
Location: Manual Compression Testing Machines
Testing range of 3,000 to 300,000 lbs. (13.3 – 1,334 kN) with an accuracy of ±.5% of indicated load., Load frame stiffness of 10.5 million lbs/in, stronger than any competitive machine in its class., Choose a basic budget-minded digital or an advanced indicator that automatically calculates and...
High Capacity Series Compression Testing Machines
(3) options
Location: Manual Compression Testing Machines
Accuracy range of ±.5% of indicated load from 1% to machine capacity. . Request a Quote High capacity series machines feature rigid distortion-resistant load frames that are designed to meet the demands of testing high-performance concrete in a production testing program, where accurate and...
(5) options
Location: Manual Compression Testing Machines
Testing range of 300 to 30,000 lbs. (1.3 to 133.5 kN) with an accuracy of ±.5% of indicated load., Compact design requires minimal floor space. . Request a Quote The CM-30 was developed for testing concrete beams where accuracy and maintaining their required load pacing rate is an essential part of...
(1) option
Location: Head Tank
Constant Head Tank from Test Mark features a regulating valve for flow control of water, a porous media on the bottom to filter out air bubbles and an overflow port.
(8) options
Location: Manual Compression Testing Machines
Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...
(4) options
Location: Manual Compression Testing Machines
Testing range of 5,000 to 500,000 lbs. (22.2 – 2,224 kN) with an accuracy of ±.5% of indicated load., Frame stiffness rating of 41.6 million lbs/in., Easier specimen loading with large platen table. . Request a Quote Our CM-5000 series machines feature rigid distortion-resistant load frames...
(4) options
Location: Manual Compression Testing Machines
Testing range of 4,000 to 400,000 lbs. (17.8 – 1,780 kN) with an accuracy of ±.5% of indicated load., Rigid heavy duty load frame design. . Request a Quote Designed to meet the demands of production testing programs where day to day performance is required. Its heavy duty load frame features...
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
Density Drive Sampler, 3" ( 76.2 mm)
SA-1355
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 3" model.
Density Drive Sampler, 4" (101.6 mm)
SA-1360
Location: Density Drive Sampler
The density drive sampler from Test Mark determines in-place density of soil by driving a thin-walled tube into the soil mass to obtain a relatively undisturbed sample. 4" model.
(4) options
Location: Manual Compression Testing Machines
Machine custom-configured to test cubes, Accuracy of ±.5% of indicated load from 1,000 – 100,000 lbs. (11 – 1,112 kN), Choice of 3 digital load-indicating systems, Quiet-running, continuous-duty hydraulic pump . Request a Quote The CM-0100 series is based on our CM-2500 machine, custom-configured...
Blaine Air Permeability Apparatus
CA-2970
Location: Blaine Air Permeability
The Blaine Air Permeability Apparatus from Test Mark determines the fineness of Portland cement on terms of specific surface expressed as total surface area in square centimeters per gram of cement.
(3) options
Location: Aggregate Washers
Aggregate samples are automatically washed with Test Mark's aggregate washers to remove clay and other fines passing a No. 200 sieve.
